مهندسی نساجی گیلان:. گیل تکس

مهندسی نساجی گیلان:. گیل تکس

سایت تخصصی نساجی و پوشاک
مهندسی نساجی گیلان:. گیل تکس

مهندسی نساجی گیلان:. گیل تکس

سایت تخصصی نساجی و پوشاک

بنگلادش روستاهای پوشاک ایجاد می‌کند

دولت بنگلادش قصد دارد در اقدامی نوآورانه روستاهای پوشاک را در این کشور توسعه دهد.

به گزارش ایسنا، براین اساس دولت بنگلاش از سرمایه‌گذاران و کارآفرینان این کشور خواسته تا به اجرای برنامه توسعه روستاهای پوشاک در این کشور کمک کنند و در این راستا به کارآفرینان مشوقهای لازم نیز اعطا خواهد شد.

وزیر بازرگانی بنگلادش خبر توسعه روستاهای پوشاک را در این کشور در مراسم افتتاح نمایشگاه سالانه تولیدکنندگان و صادرکنندگان نساجی و پوشاک بنگلادش اعلام کرد.

قرار است روستاهای پوشاک نقش کلیدی را در زمینه توسعه صنعت نساجی و پوشاک این کشور آسیایی بازی کنند.

بنگلادش حدود پنج هزار کارخانه تولید پوشاک داشته که 3.5 میلیون نفر در آنها کار می‌کنند بیش از 80 درصد از این کارگران زن هستند.

به گزارش شینهوا، صادرات پوشاک بنگلادش در سال مالی 11-2010 به 22.93 میلیارد دلار رسید. قرار است این رقم در سال مالی جاری به 26.5 میلیارد دلار برسد.

Protex Introduces REXAMINE®CP 9194 AL Softening Agent

Paris-based Protex International — a producer of chemical and biochemical specialties for a variety of industries — has developed a softening agent for finishing natural and man-made fibers. According to Protex, REXAMINE®CP 9194 AL helps to impart the bulk and slip often needed to finish articles, and is particularly effective when a soft, full hand with an excellent slip is required. The softening agent — which complies with Oeko-Tex® Standard 100, Class I to IV — also enhances other properties including abrasion resistance, tear strength, and cutting and sewing suitability; and improves hydrophilicity of the treated cellulosic textile substrate. Rexamine®CP 9194 AL is slightly cationic, and under normal conditions of use, will not modify whites or change the shades of finished articles.

معرفی پرینتر جدید شرکت ساتو

Charlotte-based SATO America Inc. — a manufacturer of barcode printing, labeling and electronic product code/radio frequency identification solutions, and the North American division of Tokyo-based SATO Corp. — has introduced GY412, an industrial-design direct thermal printer with two print heads that print simultaneously on both sides of a coated label. According to the company, the new printer offers improved productivity and cost savings because it removes the need for secondary printers to print packing slips and the associated cost of additional printing supplies; and also eliminates waste such as the label liner used with single-sided label printers.

"Typically, most companies utilize up to three printers for their picking, packing, and shipping processes," said Robert Linse, president, SATO America. "One printer for the pick list, one for the packing slip, and one for their shipping label; but now with the GY412, the need for the packing slip printer and the associated costs of paper, ink or toner, and packing slip adhesive pouches is eliminated. This is a significant savings in real dollars as well as in labor costs as the solution may allow process modification and reassignment of staff to more critical need activities."

The GY412 is suitable for applications including transportation, logistics, e-commerce fulfillments and forms, and shipping labels, among others. The printer features a variety of onboard linear and two-dimensional symbologies; high-speed printing up to 10 inches per second; and interface options including USB 2.0, LAN (10/100BaseT) and RS-232C (Serial


با ترجمه و ارسال این مطلب و مطالب مشابه به ما کمک کنید
آدرس برای ارسال :

mrl590@gmail.com

تاتام سیستم کنترل جدید خود را معرفی کرد

United Kingdom-based Tatham Ltd. — a global supplier of drive and control equipment for woolen and nonwovens processing — has developed a system that provides higher production speeds and improved product weight distribution for crosslapper control while offering substantial energy savings.

The TSX control system, which can be retrofitted to all makes of crosslappers, uses ABB high-performance machinery drives and servomotors. Depending on the existing crosslapper configuration, several panel combinations are available. The system is linked to the master process control using Profibus, an ABB AC500 programmable logic controller (PLC) that provides positioning data to the drives, which then convert the data into control signals to maintain servomotor speed.

According to Tatham, when the TSX system was retrofitted to an existing crosslapper, the energy usage dropped from 60 Amps to 15 Amps. The company reports the software offers precise, repeatable positioning to provide complete control of the batt profile. The ABB PLC, drives and servomotors are used to vary the speed at which the batt is laid down, offering a more accurate and controllable buildup of the layers. The TSX system can adjust carriage speed at the edges of the batt to avoid distortions and maintain the required density across the entire width. The parameters may be adjusted using the touchscreen operator interface, and the batt density may be adjusted across its width to suit the product requirements with coefficient of variation values of around 1 percent.

Tatham also offers a closed loop control system to automatically adjust the batt profile to the preset requirements. The system can be extended to link with Tatham's own TS weight control system if required.

Tatham has installed TSX systems at a geotextile manufacturer in Malaysia, papermaker felt producer in China, and an automotive textile producer in the United States, among numerous other installations globally

با ترجمه و ارسال این مطلب و مطالب مشابه به ما کمک کنید
آدرس برای ارسال :

mrl590@gmail.com


تولید بالا مصرف پایین: معرفی ماشین ریسندگی جدید ریتر

R60 با تاکید بر سودمندی و انعطاف پذیری بهبود یافت .ریتر سری جدید ماشین های ریسندگی خود r60 را در ایتمای بارسلونا معرفی کرد.

برخی از مزایای این ماشین به شرح زیر است :

  • تولید بالاتر با کمک واحد s602 جدید
  • کاهش مصرف انرژی
  • ...

  • این مطلب را کامل در ادامه مطلب بخوانید.



ادامه مطلب ...

لکترا Diamino® V5R4 را معرفی کرد

Lectra Launches Diamino® V5R4

Paris-based Lectra, a provider of integrated technology solutions for soft-goods applications, has introduced Diamino® V5R4, the latest edition of its marker-making technology, offering features to improve speed and efficiency with regard to marker-making and material consumption optimization in the costing, prototyping and production phases of product development.

"Buying material is now a major expense for manufacturers in the fashion, automotive and furniture sectors and for companies that use industrial fabrics," said Daniel Harari, CEO, Lectra. "Marker-making is therefore a key lever for evaluating and guaranteeing the profitability of a product at a very early stage and improving its cost price. The time savings, streamlined processes, and material optimization offered by Diamino V5R4 give our customers a competitive edge.

"Solutions include DiaminoFashion and DiaminoFurniture as well as the DiaminoTechTex solution designed for automotive, composite and industrial fabrics applications. The newest edition of the technology uses two methods to optimize material consumption, with a manual method used for interactive marker-making and an automated method that uses Diamino's algorithms when interaction is not needed. The methods also can be combined to make more complex markers.

According to Lectra, manufacturers can use Diamino V5R4's new rapid Optimizer function in both manual and automated mode on existing markers and realize material savings averaging 1 percent over a substantial number of markers. Manufacturers working with lists or batches of markers may see the efficiency of each marker improved in less than one minute.

The marker realizes further material savings by setting a protection area only around internal notches. The efficient arrangement of fuse blocks to facilitate quick assembly leads to time savings. Diamino V5R4 also provides direct access to HP-GL and Cutfile export interfaces as well as the DXF format used for automotive and aerospace applications. In addition, only one interface is needed for printer and plotter management.